Fig. 2From: A method for analysis of nuisance dust from integrated steel works: chemical and mineralogical characteristics of contributing sourcesResults of quantitative XRD analysis of example nuisance dust sample (as shown in Fig. 1), showing raw and modelled diffraction pattern, left, and quantitative phase analysis, right. Phase proportions are shown in terms of mass (wt%, with 2σ uncertainty) and volume (vol%). Coloured bars on right-hand side of table show typical association of phases with key source materials as outlined in Table 2. *Q–C–F–M = quartz–clay–feldspar–mica source/material category as in Table 2Back to article page